Due to the large amount of orders being processed, some stock levels may occasionally not reflect actual stock levels due to differences in sale processing times.
Please call to check availability to avoid disappointment.
Please call to check availability to avoid disappointment.
Sealers
AIRCRAFT DOPE I LTR CAN
BALSA DOPE The proper name for dope is Nitrocellulose Lacquer. Dope is used as a clear shrinking liquid to tighten model aircraft tissue and to provide a waterproof, lustrous finish to Balsa wood models. It can be applied directly to Balsa to increase its durability. Unfortunately, it contains volatile chemicals and should…
- Model
- ME652
Deluxe Materials BD48 WONDERFILL 240ML
240ml The next generation of strong lightweight fillers for foam and wood. An easy sanding, strong, lightweight filler designed to fill small gaps and indentations. Easily applied and smoothed with a damp finger and then sanded back. Does not crumble like other lightweight fillers and can be over-coated with Foam Armour (BD50)…
- Model
- DM-BD48
Deluxe Materials BD6 Model Lite Balsa Tint
240ml pack, Balsa Tint. Strong, lightweight filler which sands easily. Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds: wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film. …
- Model
- DM-BD6
![Deluxe Materials Eze-Dope [BD42]](images/covering/BD42.jpg "Deluxe Materials Eze-Dope [BD42]")
Deluxe Materials Eze-Dope [BD42]
250ml A specially formulated water soluble dope for shrinking, strengthening and wind-proofing model tissue paper. It is non flammable, has little odour and dries rapidly to a semi-matt finish. Use to apply tissue decoration to all types of foam.…
- Model
- DM-BD42
![Deluxe Materials Eze-Kote [BD37]](images/covering/BD37.jpg "Deluxe Materials Eze-Kote [BD37]")
Deluxe Materials Eze-Kote [BD37]
Laminating and finishing resin for balsa and foam models.
Eze-Kote is a 1-part water based foam-safe, low odour, resin alternative to epoxy.
Brush onto balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily and painted after 20-30 mins.
Coverage: 75ml…
- Model
- DM-BD37
![Deluxe Materials Foam Armour [BD50]](images/covering/BD50.png "Deluxe Materials Foam Armour [BD50]")
Deluxe Materials Foam Armour [BD50]
Creates a hard durable surface layer on foam and wood.
A thick water based resin that sets to produce an attractive, durable, scratch resistant coating on foam to prevent dings, wear and disintegration.
It dries to a surface that can be painted and glued easily and will reduce…
- Model
- DM-BD50
Deluxe Materials Sand 'n' Seal [BD49]
Description: Sand 'n' Seal 250ml A specially formulated wood grain sealer. Coats and seals wood grain prior to painting and finishing. Use with all types of paints including enamel, cellulose, acrylic or epoxy. Stir well before use. Apply with brush and allow to dry. Sands beautifully after 60 mins. Clean brushes with water. Economical in use. Low odour and…
- Model
- DM-BD49
![Deluxe Materials Track Magic 250ml 8.5oz [AC26]](images/deluxe_materials/DM-AC26.jpg "Deluxe Materials Track Magic 250ml 8.5oz [AC26]")
Sig Sanding Sealer 16Oz Surface Primer
SIG Sanding Sealer
Creates an ultra-smooth base for a prize winning butyrate dope finish. Quickly fills wood grain and covering materials.
Sanding Sealer is basically our Lite-Coat low-shrink butyrate dope with special light weight, easy-to-sand fillers added that make it the perfect surface primer for a dope finish. Two…
- Model
- SIGSL004
STIX-IT,HEAT ACT. ADHESIVE 16 OZ
SIG STIX-IT Heat Activated Covering Adhesive Easy to use Saves time Superior adhesion Allows economical covering materials to be iron-on Keeps iron-on plastic & fabric coverings stuck down Strengthens and seals the wood Low weight, one thin brushed-on coat is all that is necessary Cleans up with Sig Butyrate Dope Thinner Compatible with all common model airplane paints Stix-It is…
- Model
- SIGYSX002
STIX-IT,HEAT ACT. ADHESIVE 8 OZ
SIG STIX-IT Heat Activated Covering Adhesive
ò Easy to use
ò Saves time
ò Superior adhesion
ò Allows economical covering materials to be iron-on
ò Keeps iron-on plastic & fabric coverings stuck down
ò Strengthens and seals the wood
ò Low weight, one thin brushed-on coat is all…
- Model
- SIGYSX001
TAMIYA LIGHT-CURING PUTTY
Light Curing Putty
Revolutionary Light-Curing Putty to speed-up finishing time!
The Light-Curing Putty will cure in approx. 1 minute when exposed to direct sunlight, or in approx. 2 minutes under fluorescent light (27W).
The Light-Curing Putty is a one-component putty so does not require any curing agent, realizing very…
- Model
- 87076-000
TAMIYA PUTTY (BASIC TYPE)
Putty - Basic Type
Tamiya Basic Type Putty is used for filling in seams when assembling plastic model kits or RC models that use ABS or styrene plastic bodies. The putty is gray in color and may be applied with a flat surface tool. Note: Tamiya's basic type putty is not…
- Model
- 87053-A00
Tamiya Putty (White) 32g
DescriptionThe currently available Tamiya Putty (Basic Type) has long been praised by modellers for its high quality and ease of use. However, it...s gray color sometimes made painting over it with a lighter color difficult. Tamiya now provides modellers with a white-colored putty to solve this problem. Useful for filling…
- Model
- 87095-A00
- 1 x Pirate
- 1 x Eagle 1.85 Kite
- 1 x Jellyfish - Blue
- 1 x Electric
- 1 x Ladybird
- 1 x Owl
- 1 x FMS 1220mm Ranger EP V3 RTF Yellow with reflex V3 Mode 2
$680.69
.jpg "Arrma Dboots 'Fortress MT' Tire Set Glued Gun Metal, 4 pcs")