Overview
This plane is a well designed for .91/15cc size trainer for beginner pilots. It has sturdy all balsa/ply wood construction and is very stable in flight. Bigger wing and bigger wing area helps give a more stable flight. 3 degree wing dihedral gives a good balance flight stability and agility. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to seperately purchase the nitro engine and radio system, and can fly this plane after 1-2 hours of installation.
Features
- Designed for compatibility with both GP and EP flight
- Extremely lightweight lasercut allwood construction
- All hardware included
Product Information
This plane is a well designed for .91/15cc size trainer for beginner pilots. It has sturdy all balsa/ply wood construction and is very stable in flight. Bigger wing and bigger wing area helps give a more stable flight. 3 degree wing dihedral gives a good balance flight stability and agility. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to seperately purchase the nitro engine and radio system, and can fly this plane after 1-2 hours of installation.
Electric
Motor Tomcat G60
80 Amp ESC
6S 5000mah Battery
14x12 Electric Prop
Anti Spark Arrester recommended
Specs
Wingspan 1730mm (68.1 in)
Length 1371mm (53.9 in)
Flying weight 3500-4200 gr
Wing area 50.5 dm2
Wing loading 73g/dm2
Wing type Naca airfoils
Covering type V-kote film
Spinner size Plastic 58mm (included)
Radio 4 channel minimum (not included)
Servo 5 standard servo2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)
Recommended receiver battery 4.8-6V / 800-1200mAh NiMH (not included)
Servo mount 21mm x 42 mm
Propeller suit with your engine
Engine .91/15cc / 2-stroke (not included)
Motor brushless out runner
Experience level Beginer
Plane type Trainer
Packing
Dimension (mm)
Box : 5kg 133 x 38 x 22
