Multiplex parts are not normally held in stock, they are ordered as needed weekly from our Australian Distributor. If the Australia distributor is out of stock there will be a delay in sending your order.
If you need your item urgently please call to confirm availability
Overview
This Multiplex ROXXY Brushless ESC is designed for surface and helicopter models.
Features
- Low-voltage cut-off for LiPo and NiXX batteries
- Brake: ON or OFF
- Motor reverse: ON or OFF
- Motor cut-off type: motor power reduction or motor cut
- Motor start behaviour: soft or standard
- Timing: automatic or manual (7 degrees or 22 - 30 degrees)
- Pulse frequency: 8 kHz or 16 kHz
- Model type: fixed-wing or helicopter (governor mode)
- With S-BEC= switching BEC (Battery Eliminator Circuit) receiver power supply from the flight battery, even with high cell-count packs and a large number of servos
- Start-up safety system prevents the motor bursting into life when the flight battery is connected
- Motor cut if major interference occurs or the radio signal fails
- Automatic low voltage cut-off with re-start facility (Reset function) for LiPo and NiXX cells
Product Information
Designed for surface and helicopter models, this ROXXY® BL Control Controller features a high-performance BEC switch. Using the latest switching regulators, it can be powered from up to 6S LiPo cells as a drive battery. A separate receiver battery is eliminated.
Extensive programming options allow the controller to be optimally adapted to the respective application
Specs
Max. Continuous Current: 80A (burst 90A)
Pulse Frequency 8 kHz or 16 kHz (adjustable)
Battery / Cell count 2-6S LiPo or 5-21 NiXX
Cell Count with S-BEC Disabled: 2-6S LiPo or 5-21 NiXX
S-BEC Voltage: 5.5 V
Max. S-BEC Current: 7.0 A (burst 10A)
Max. Number of Servos
*** 10 x Standard* 6 x High Torque**
Dimensions (approx.): 89 x 37 x 13 mm
Weight incl. Leads: 93 g
Receiver Power supply: Yes
Control: Forward
Telemetry: No
.jpg "RH-10723 Wheel and tyre (2 Pair) 4 - tyres suit Cobra")
