Kyosho 1/10 PureTen GP 4WD FW-06 Alpine GT4 Readyset

Enjoy a wide range from parking lots to race circuits.
Proven shaft-driven 4WD chassis with newly developed engine!

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power newly developed KE15SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

?“Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. ?Loaded with KE15SP engine with slide carburetor fitted with slow idle adjustment.
?Reliable universal swing shafts included on front.
?Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
?KYOSHO's proven center-shaft drive 4WD provides light control response.
?Disk brakes deliver reliable and responsive braking control.
?Unique compact recoil starter realizes lower resistance and starts the engine with a pull on the starter cord.
?Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
?Fitted with tuned muffler.
?High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
?Compatible with many FW-05 parts. *Not compatible with some parts.

Technical Data

?Length 463mm
?Width 220mm
?Height 129mm
?Wheelbase?258mm
?Tread (F/R)?176mm
?Tire(F/R)?φ66×25mm
?Gear Ratio?7.47 / 5.44:1
?Weight?1,800g (approx.)
?Engine KE15SP with recoil starter

<Kit Contents>
?Fully-assembled chassis complete with pre-set control linkages
?Pre-mounted KE15SP engine with recoil starter
?Special manifold and muffler
?Finished pre-cut body complete with paint and stickers applied
?Syncro KT-231P+ transmitter
1.5mm/2mm/2.5mm/5mm ?Hex wrench
?Cross wrench

<Required for Operation>
?8 x AA-size alkaline batteries for R/C system
?Fuel
?Fuel bottle
?Plug heater