Receiver Digital switch with 15A BEC current supply
Product features:
Using ultra high brightness led segment which can clearly be visible in the sunlight.
A set of electronic switch, input-output voltage display, 20AMP UBEC high current supply foryour receiver..
The three led segment displays real-time input and output voltage value, knowing the battery condition at any time.
Output voltage supply of 4.8-9.6V stepless adjustable, for a variety of high and low voltage servos and receivesr.
15A large current output ( MAX: 20A ), which can provided sufficient working current for demanding servos.
Working voltage 6-13V, which can be directly supplied by LiPo, NiMh, NiCad battery.
In case of switch failure will continue to supply current to the receiver.
Technical parameters:
* Display Voltage : 4-13V
* Input voltage: 6-13V
* BEC: Max 15A
* Output voltage: factory preset 5.2V (4.8-9.6V Stepless adjustable)
* Mounting holes distance: 59mm
* Size: 68mm ( L ) * 25.38mm ( W) * 28mm ( H )
* Weight: 39.1g
How to use:
B pressing the red button for 2 seconds (button lights turn on, led segment display input voltage value for 3 seconds until button lights turning to flashing at this moment led segment display output voltage for 3 seconds after returning button light on and the led segment display input voltage value.
Press the red button for 2 seconds to shutdown system.
In the working state, short press the red button to switch the display channel of the output and input voltage value.
If you want to adjust the output voltage value, short press the red button to switch to display the output voltage value, use a screwdriver to adjust the potentiometer at the end of the step-down converter, counterclockwise rotation can turn down the output voltage value, the clockwise rotation can turn up of the output voltage value ( notice: disconnect the receiver or the electric device to the converter before adjust the voltage).
Attentions:
Not allowed to counter-battery polarity.
Do not come into contact with installation of grease or water, or near a corrosive substance.
Ventilation should be pay attention in the condition of large current. Please use the high-quality battery to avoid loss-of-control.
