Overview
The HobbyZone Carbon Cub S 2 is the most versatile, capable and easiest to fly scale RC airplane yet! It's equipped with SAFE and can easily be upgraded to SAFE Plus GPS-enabled technology, plus it now includes advanced Smart technology components.
Features
- Based on the classic Carbon Cub from Cubcrafters this scale trainer is easy to fly, versatile and capable
- Learn to fly made simple with exclusive SAFE technology that will help you avoid crashes
- Change flight modes with a flip of a switch between Beginner, Intermediate and Experienced
- For smoother landings there is an option Landing Assist Sensor (LAS) that is easy to install
- Prevent crashes and loss of control by engaging Panic Recovery mode with one button push
- Additional features available through the SAFE Plus upgrade that enables GPS technology so pilot can use Autoland, Virtual Fence, and, Holding Pattern options
- Spektrum serial receiver, flight controller and servos are all factory installed
- 30A telemetry capable ESC included with the efficient and powerful brushless power system
- Rolls, loops and inverted (upside down) flight capable
- Oversized tyres and rugged landing gear enable use on a variety of surfaces
- No special tools or glue required for the quick and easy assembly
- Tough lightweight and durable EPO construction
- Full range of spare and replacement parts available as well as optional float system for use on water
- With RealFlight RC flight simulator you can practice flying this aircraft before purchase
- Optional flaps for slow speed control and shorter takeoffs and landings
What you need
- Full-range 6–7+ channel Spektrum DSMX®/DSM2® compatible transmitter
- 3S 11.1V 1300–2200mAh LiPo with EC3™ or IC3™ Connector
- Compatible LiPo charger
Specs
Charger Sold separately
Technology SAFE Technology
Propeller Size 9x6
Approximate Assembly Time Less than 1 Hour
Completion Level Bind-N-Fly Basic
Flaps Optional
Material EPO foam
Wingspan 51 in (1300mm)
Minimum Required Radio 4-channel, sold separately
Approximate Flight Time 5-7 minutes
CG (Center of Gravity) 2.4 - 2.7" (62 - 68mm) back from leading edge of wing at the root
Retracts No
Motor Size 480
Recommended Motor Battery 3S 2200mAh sold separately
Rudder Yes
Elevator Yes
Landing Gear Fixed main with steerable tail wheel
Length 34 in (865mm)
Transmitter Range Full
Minimum Speed Control 30A
Spinner Size 1.6 in (40mm) diameter
Wing Tube Length 16.1 in (410mm)
Wing Tube OD 0.39" (10mm)
Servos 2-aileron, 1-elevator, 1-rudder
