Hitec HS-7954SH G2 Digital HV Super Torque Servo, MG

Features

• G2 Digital Circuit
• HV Coreless Motor
• Dual Ball Bearing Supported Output Shaft
• Steel Gear Train (MK first gear)

Product Information

The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market. Based on the ultra popular HS-7955TG, the HS-7954SH has the added benefit of our high voltage coreless motor. With 403 inch ounce of torque at 7.4 volts, the HS-7954SH is fast too with a 0.12 second transit time when operating on a 2 cell LiPo pack. The HS-7954SH harnesses all this power by utilizing a heavy duty case that incorporates an aluminum heat sink, hardened steel gears, and two strong steel gear pins nested in brass axial bushings. Put it all together and you get one tough high voltage servo at a price that can't be beat.

Programmable Functions

• End Point Adjustments
• Direction
• Fail Safe
• Dead Band
• Speed (Slower)
• Overload Protection
• Resolution
• Data Save / Load
• Program Reset

Specs

Operating Voltage Range (Volts DC) 6.0V ~ 7.4V

Speed (Second @ 60°) 0.15 ~ 0.12

Maximum Torque Range oz. / in. 333 ~ 403

Maximum Torque Range kg. / cm. 24.0 ~ 29.0

Current Draw at Idle 9 mA

No Load Operating Current Draw 240 mA

Stall Current Draw 3,000 mA

Dead Band Width 1 µs

Dimensions (Metric) 40.0 x 20.0 x 37.0

Weight (Gram) 68

Circuit Type G2 Programable Digital

Motor Type Coreless Metal Brush

Gear Material Steel

Bearing Type Dual Ball Bearing

Output Shaft (type / Ømm) Standard 24

Case Material Plastic / Aluminum

Dust / Water Resistance Splash Proof

Connector Gauge (AWG) / Strand Count 22 / 60