EXCALIBER, 1320mm SP. .40-.50 2C *

BALSA USA KIT No.442 EXCALIBER 1320mm WINGSPAN

A "Twin Tail Tiger" with the vintage look of a 1950's air racer!

Whether you enjoyed these models back "In The Day" or are new to the hobby don't miss out on the fun of "back to basics" flying with these easy to build classic R/C models! Although these kits now feature modern fully "photo illustrated" instruction manuals detailing every step of the building process as well as suggested updates to bring them up to modern standards, they also include the original 1970's era two pages of type written instructions, and of course the original plans! Designed for .40 2-stroke glow engines these kits feature fully symmetrical "one piece" bolt on wings, vacuum formed clear plastick canopies, pre-bent wire landing gear, name brand hardware (hinges not included), rolled plans and of course Balsa USA's top quality die cut balsa and plywood parts!

Specifications

• Wing span:52 inches
• Wing Area:525 sq. in.
• Wing Loading:22-24 oz./sq. ft.
• Flying Weight:5 - 5-1/2 lbs.
• Fuselage Length:43 inches
• Engine Size Glow 2-Stroke:.40-.50 or equivalent E-power

• Center of Gravity: 5 inches back from the leading edge of the Top Wing.
•  
• Control Throws:
• Elevator: 1 inch up and down.
• Rudder: 2-3/4 inches left and right.
• Ailerons: 1 inch up and down.
• Aileron Differential: 1 inch up and 3/8 inch down (differential recommended).
•  
• Incidence:
• Top Wing: +1-2 Degrees.
• Bottom Wing: -1-0.0 Degrees.
• Tail: 0.0 Degrees.
• Engine Thrust Line: 2 Degrees DOWN, 1-2 Degrees RIGHT.