Castle Creations Mamba Micro X2 2-4S Waterproof Sensored 4.0mm ESC with 1007-635

This MAMBA MICRO X2,16.8V, WP Sensored ESC & 1007-6350Kv Motor Combo is ideal for 1/14th and 1/16th scale vehicles, weighing up to 2.75lbs and up to 3s LiPo. The sensored 1007-6350kv motor allows for a smooth startup with heaps of torque and low temperatures.

Features

• Input Voltage range 2S-3S with included motor.
• Waterproof design, included CC BEC is not waterproof.
• Sensored Motor capable
• Convenient transmitter programming for six common adjustable settings.
• Additional settings and software updates available via Windows®-based Castle Link software and USB adapter or the Castle Link App and a B-LINK Bluetooth Adapter
• Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters)
• Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake.
• Audible Alerts that will notify you of possible issues with calibrations and error conditions.
• Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty.

Specs

ESC Specs

Input Voltage Range: 2S-4S LiPo (16.8V Max) (3s LiPo Max with included 1007-6350kv motor)

BEC Specifications: No internal BEC in ESC. External 10-amp CC BEC included.

Operating Environment: Waterproof* design allows for use in nearly any environment; included CC BEC is not waterproof.

Brake: Proportional

Reversible: Yes, but may be disabled

On/Off Switch: Yes, waterproof

Cooling Fan: Coming soon, uses 25mm size fan

Size (L x W x H): 41.6 mm x 29.4 mm x 21.3 mm (1.64"" x 1.16"" x .84"")

Weight (with wires): 1.66 oz / 47 grams

Connectors: 4.0 mm bullets

Items Needed for Operation: Battery Connector required: Castle 4.0mm Polarized Connectors, Deans Ultra Plugs and XT60 are recommended.

Product Use Statements: Applying voltages higher than 16.8 volts will cause irreparable damage to your controller, voiding your warranty.
Recommended battery capacity for 1:18 scale vehicles is 1500mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).
Mamba Micro X has 4.0mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps.

Programmability: Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately)

Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX Transmitters.

Tech Notes: If running on 4s, and using two 2s LiPos in series, please refer to this BEC wiring diagram.
*Although the Mamba Micro X2 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.

Motor Specs

Input Voltage Range: 2s - 3s LiPo

Kv: 6350

Max. RPM: 80000

Size: Length: 50.3 mm Diameter: 28 mm

Weight (w/wires): 4.05oz (114.8g)

Shaft Size: Length: 15 mm Diameter: 1/8"" (3.175 mm)

Mounting Hole Specifications: M.5 @ 14mm & 16mm; M3 @ 19 mm

Connectors: 4mm male Castle Bullet Connectors attached to replaceable 16 gauge wire; includes 210mm length sensored wire

Items Needed for Operation: Compatible Electronic Speed Control (ESC)

Application Guidelines: Ideal for 1/16th and 1/14th scale vehicles weighing up to 2.75lbs.

Recommended ESC(s): Mamba Micro X2

Running Modes: SmartSense™ (with Castle Sensor capable ESC), Sensored and an ultra-efficient Sensorless mode.

Tech Notes: Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.