Castle Creations Mamba X Brushless ESC w/ 1800kv 1512 Sensored M

Ordered in as required, please ring or email to enquiry on lead time

Overview

The Mamba X represents the latest and greatest in Castle Creations Inc. ESC technology. Originally designed to overpower 1:10th scale buggies and trucks, the Mamba X also delivers amazing race capabilities for 1:8th scale eBuggy. After being extensively race-tested by Castle Creations' Lead Mechanical Engineer and Team Driver, Taylor James - the Mamba X has been approved for eBuggy racing with two of our most popular 15 Series Motors.

Features

• Wide 2S to 6S input voltage range ((3-4S LiPo MAX w/15121800KV MOTOR)
• Sensored Motor Support (Castle XSeries Sensor Harness Included)
• Waterproof
• 8A Adjustable BEC (5.25V8.0V)
• Datalogging
• Rugged CNC Aluminum Case
• Castle Link Programming Support
• SmartSense
• Integrated Capacitors
• Removable 30mm Cooling Fan
• Integrated 4mm Bullet Connectors
• 12 AWG Power Wires
• Waterproof Switch
• Audible Alerts
• 4POLE 12SLOT Rebuildable Design
• QUIETSENSE Technology
• ROAR Standard Sensor Port and Labeled Connections
• HighPerformance 0.2 mm Steel Lamination Stacked Stator
• HighStrength Kevlar Wrap
• HighStrength, 180° C Grade, Neodymium Sintered Magnets
• Oversized, LowResistance, GoldPlated Solder Tabs
• Oversized NMB Bearings
• M3 and M4 @ 25mm Mounting Hole
• 4mm male Castle Bullet Connectors
• 210mm length Sensor Wire
• Optional cooling fan coming soon
• Silicone coated sensor board

Product Information

The Mamba X represents the latest and greatest in Castle Creations Inc. ESC technology. Originally designed to overpower 1:10th scale buggies and trucks, the Mamba X also delivers amazing race capabilities for 1:8th scale eBuggy. After being extensively race-tested by Castle Creations' Lead Mechanical Engineer and Team Driver, Taylor James - the Mamba X has been approved for eBuggy racing with two of our most popular 15 Series Motors.

This ROAR APPROVED combo is a Mamba X ESC and 1512 1.5Y 1800kv motor for lighter 1/8th scale applications. Normally this motor is paired with our 1/8th scale Mamba Monster X ESC; but if you need to save some weight or need a smaller footprint, the Mamba X is more than capable of running this motor. This setup is recommended for 3s or 4s use in a vehicle weighing less than ~9lbs and geared for no more than ~45 MPH. If you have a heavier vehicle, looking for more speed or just want to beat the ever loving snot out of your vehicle we would recommend picking up the Mamba Monster X combo.

Specs

ESC Specs

Min. Input Voltage Range 2S LiPo

Max Input Voltage Range 6S LiPo (25.2V) (Max 4s with included motor)

BEC Specifications Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V

Operating Environment

Waterproof* design allows for use in nearly any environment.

Brake Proportional

Reversible Yes, but may be disabled for racing.

On/Off Switch Yes

Cooling Fan Yes, factory equipped (30mm), fully removable** (see Product Use Statements below)

Size

Length: 2.14" (54.4mm)

Width: 1.39" (35.2mm)

Height: 1.18" (30.0mm)

Weight (with wires) 3.56 oz. (101g)

Connectors: 4.0mm female bullets for motor connection.

Motor Specs Input Voltage Range:

3-4S LiPo

Kv: 1800

Max. RPM: 60000

Size: Length: 67.7mm

Diameter: 40mm (41.4mm with fins)

Weight (w/wires): 385g / 13.6oz

Shaft Size: Length: 20mm
Diameter: 5mm

Mounting Hole Specifications:

M3 and M4 @ 25mm

Cooling Fan: Optional, coming soon!

Connectors: 4mm male Castle Bullet Connectors, includes 210mm length sensor wire.

Application Guidelines:

Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9lbs. (ROAR 1/8 MOD APPROVED)