Balsa USA 1/4 SCALE 3 POINT WW1 FLOATS *

BALSA USA Kit No. 459 1/4 SCALE 3 POINT WWI FLOAT SET (FLOATS ONLY)

The Balsa USA 3-Point "WWI Floats" are built utilizing Balsa, Basswood, and Plywood. Pre drilled metal mounting tangs are supplied along with a complete hardware package. Pre shaped basswood struts reduce building and sanding time to maximize your enjoyment while building your floats. 1/32 plywood bottoms on the main floats aid in the prevention of accidental damage from a run in with rocks or the shoreline.

The kit is completely laser cut enabling the use of the lightest materials possible, yet still allowing maximum durability. All laser cut parts are etched with the proper name for easy identafacation! Out of all the similar style floats available on the market, Balsa USA's "WWI Floats" are the easiest to build and assemble the quickest. This allows you to get the advantage over the enemy by being the first in the air!

With the floats properly installed, they will comfortably support a 22 pound airplane. This allows you to install them on most 1/4 scale WWI planes!

Features

• Laser Cut
• Rolled Plans
• Premium Name Brand Hardware
• Complete Hardware Package

Specifications

Main Floats

• Weight - 44.5 ounces
• Length - 27-7/8 inches
• Height - 5 inches
• Width - 4-7/8 inches
• Spread - Up To 36 inches (Depending on Plane)

Tail Float

• Weight - 5.1 ounces
• Length - 13-3/4 inches
• Height - 3-3/8 inches
• Width - 4-1/4 inches