The four-wheel drive chassis and drift-specific tires are pre-installed, so you can enjoy drifting in a small space! The MINI-Z AWD series comes with the Syncro KT-531P transmitter.
We want more drivers to experience the driving performance of the MINI-Z AWD. The MINI-Z AWD Ready Set was born to make that wish come true. The MA-020 series chassis features a VCS (Variable Camber Suspension) on the front that optimizes camber change with stroke, and a revised steering control program. It is compatible with a special gyro (sold separately: part number MZW446), and is equipped with a special space and gyro adjustment volume. The effectiveness of the gyro can be adjusted on the chassis alone, and posture changes are reflected in the steering correction, providing beginners with peace of mind and experts with support to demonstrate their true abilities. It also features 14 bearings for full bearing specifications. We have achieved a fully-equipped chassis that is extremely efficient and durable at an affordable price. The set includes a MINI-Z body with a sense of scale and a 2.4GHz R/C system, Syncro KT-531P, which does not require band management. Drift tires are standard equipment, so you can enjoy thrilling drifting driving right away with just a set of batteries. Of course, it is compatible with many of the MINI-Z's ASC bodies (separate parts may be required for some models). Experience the driving experience that can only be experienced with an AWD chassis with the MINI-Z AWD.
*The separately sold LED light unit set (No. MZW429R) can be installed on the Toyota Corolla Levin AE86.
- Renewed version of the AWD sports chassis based on the MA-020 series chassis.
- Special circuit board with revised steering control program.
- Equipped with a volume that allows the effectiveness of the gyro to be adjusted on the chassis alone.
- Drift tires included as standard.
- Ready set that can be driven immediately after adding batteries.
- Uses 2.4GHz Syncro KT-531P transmitter that does not require band management.
- Factory-assembled body with the same finish as the display model.
- Uses "VCS" front suspension that brings out camber change with the suspension stroke.
- No tools required, easy replacement of coil springs for front suspension.
- A wide range of optional parts can be installed.
- Note) Optional ICS cannot be used. In addition, since it is designed exclusively for the KT-531P transmitter, it is not compatible with the KT-18, KT19, EX-5UR ASF, EX-6, or EX-6R transmitters. In addition, only the dedicated gyro unit (sold separately: part number MZW446) is compatible.
The AE86 Corolla Levin, also known as the "Hachiroku," showcased nimble driving characteristics thanks to its combination of a FR layout and an engine with good pickup. It was released in 1983, but its appeal, along with that of its sister car, the Sprinter Trueno, has not faded even today.
Includes the stylishly designed Syncro KT-531P transmitter. In addition to steering/throttle trim, it is equipped with a dual rate that allows for adjustment of steering angle and LED control function. It also has a training mode setting which limits the vehicle speed (the transmitter is set to training mode at the time of shipment).
A chassis exclusively for AWD ready sets, based on the MA-020 series chassis and equipped with a RA45 unit.
The VCS front suspension allows for camber change in accordance with the suspension stroke. No tools are required and the coil springs of the front suspension can be easily replaced.
The rear suspension is a strut type.
Full bearing specifications include 14 bearings.
Drift tires come standard.
Compatible with the dedicated gyro (sold separately: part number MZW446), and equipped with a dedicated space and gyro adjustment volume.
Readyset Contents:
- Fully assembled chassis with R/C unit installed
- Factory assembled plastic body with painting and markings
- Syncro KT-531P 2.4GHz transmitter
- Mini pylon
- Pinion gears (15T, 17T, 19T, 21T)
- Spur gears (27T, 29T, 31T)
- Spare nuts
- Wheel wrench
- Pinion removal tool
Required for operation:
- 4x AAA batteries for transmitter
- 4x AAA batteries (alkaline or nickel-metal hydride) for chassis
